Home
- - Knowledge base
Developer Docs
Changelog

Community
What's New?
RevenueCat Announcements

RevenueCat Announcements

Read the latest announcements from the RevenueCat team.

45 Posts
108 Replies

When you subscribe we will email you when there is a new topic in this category

45 Posts

Most replies

Most views

Newest first

JensRevenueCat Staff

posted in RevenueCat Announcements

Improved customer lists loading times

We are currently rolling out some improvements to our customer lists. In the next few days, you will find a new setting in the filter settings for your customer lists: the ability to define whether the filters should only be applied to those customers with purchases (e.g., started a trial, started a subscription, or made a non-subscription purchase) or not. By default, lists will only include customers with purchases. This means that lists will now load much more quickly in most cases, since apps typically have vastly more customers without purchases than those with customers. For those lists that should include customers without purchases, you can simply change the setting – this will mean the list loads and exports somewhat slower (but not slower than it did until today).For your existing customer lists, the setting has been automatically set to the "correct" setting as per the other filters – if a list currently contains customers without transactions, the setting will be "All custo

1020

2 years ago

tinaRevenueCat Staff

posted in RevenueCat Announcements

Product change events now sent to integrations

Our webhooks have supported product change events for a while, and now product change events are being sent to analytics and CRM integrations. This event will be sent to integrations whenever a subscriber changes the product of their subscription. This does not necessarily mean the new product is in effect immediately. See our docs on Managing Subscriptions for more information about upgrades, downgrades, and crossgrades.In order to receive these events, you will need to set the event name in your configured integrations:(remember to hit the ‘Save’ button in the upper right corner)We hope this new event type is useful! Let us know about any questions, comments, or concerns with the new event.

1890

2 years ago

JensRevenueCat Staff

posted in RevenueCat Announcements

Showing non-subscription purchases in our charts

We are making some small improvements to how we show non-subscription purchases in our charts. Starting today, under the “product duration” filter or segment you will find the entry “Non-subscription purchase” which contains all of these purchases. This allows you to look at revenue coming from or conversion to these non-subscription purchases in all of our charts that allow filtering and segmentation.We hope this makes things easier for those of our customers who rely on non-subscription purchases!

1140

2 years ago

tinaRevenueCat Staff

posted in RevenueCat Announcements

New Integration: Iterable

As of today, we have launched an Iterable integration (available on the Pro plan), which automatically sends subscription events to Iterable. Iterable is a cross-channel platform that powers unified customer experiences and empowers marketers to create, optimize and measure every interaction taking place throughout the customer journey. With Iterable, brands create individualized marketing touchpoints that earn engagement, solidify trust and galvanize loyal consumer-brand relationships.This can be helpful in understanding what stage a customer is in to react accordingly. For example, you might want to:Automate an onboarding workflow to a user in a free trial Send an SMS to a loyal user and offer them a discount Trigger an email to users who cancel their free trial To set this up, follow our RevenueCat documentation here: https://docs.revenuecat.com/docs/iterable

1050

2 years ago

tinaRevenueCat Staff

posted in RevenueCat Announcements

New Integration: Superwall

Today, we have launched a Superwall integration (available on the Pro plan), which automatically sends billing, subscription, and revenue metrics to your Superwall project. This integration will allow you to create paywalls on-the-fly without shipping app updates, determine which paywalls have high trial conversion rates, find which product and paywall combinations have the highest LTVs, and offer discounts to churn users. To set this up, follow our RevenueCat documentation here: https://docs.revenuecat.com/docs/superwall

2510

2 years ago

Anonymous

posted in RevenueCat Announcements

Looking for RevenueCat v4 iOS SDK Beta testers 🎉

RevenueCat SDK 4.0.0-beta.1 is out Hey all, some of you might know we’ve been hard at work migrating our mixed-language Purchases.framework to Swift. Well, we did it, and we’re excited to share it with you!For context, here were our goals of the migration: 🦶 Lowers our overall footprint for modules. 🗣️ Unifies the language used for the entire SDK. 🚤 Faster feature development, bug fixes on old logic, and integration through simplified SDK, CI, and testing infrastructure. 🐐 Improve consistency among our API calls, classes, properties, etc. Enable us to implement StoreKit2 changes easier. 🧑‍🏫 Easier onboarding for new members (internal and external). You can find a more detailed breakdown of the motivations and our actual migration plan in our SwiftMigration.md.We haven’t added any new features (yet), but we did update our API to be more idiomatic to Swift, fixed a few tiny bugs, and improved the safety of our API through fixing various nullability mismatches.We’re plann

2343

2 years ago

JensRevenueCat Staff

posted in RevenueCat Announcements

New charts feature: Row average

As of today, you will see a small improvement in the data tables of all our charts: an average for each metric over the selected time period.(If you don’t see the feature yet, you may have to refresh your browser window.)

800

2 years ago

JensRevenueCat Staff

posted in RevenueCat Announcements

New RevenueCat features: Projects, Amazon Appstore

Today, we are launching two big improvements. Continue reading for all the nitty gritty details, but let’s start with the big advantages you have with the new features: You can now share subscriptions not only between versions of the same app on different platforms (e.g., between iOS and Google Play Store), but also between different apps on the same platform. We now support the Amazon Appstore for your Android apps. For more information, see our documentation on installing the SDK and configuring Amazon Appstore products. To enable these changes, we’ve completely overhauled our model for how apps are created and set up. Logging into your RevenueCat dashboard, you will notice that the “Apps” dropdown menu has been replaced with “Projects”:A Project is a set of Apps. Each App is specific to one platform. For example, a typical Project might contain one iOS App and one Google Play Store App. All Apps within one project share the same basic setup, including entitlements, offerings, inte

9589

3 years ago

JensRevenueCat Staff

posted in RevenueCat Announcements

New charts feature: Measures when segmenting

We recently shipped another big update to the RevenueCat charts: Charts now show all measures in the data table even when segmenting. For example, if you segment the Revenue chart, the data table will show not just the total revenue per segment, but also new vs. renewal revenue as well as proceeds. Previously, the only way to get to this information was to filter the chart for each segment individually.This makes segmentation of RevenueCat charts an even more powerful tool, unlocking a ton of insights that were previously hard to get to.

480

3 years ago

JensRevenueCat Staff

posted in RevenueCat Announcements

Billing issue events now sent to integrations

Our webhooks have for a while supported events for billing issues, now these are also being sent to analytics and CRM integrations. These events will be sent to integrations whenever a subscriber was charged unsuccessfully (e.g., expired credit card or lack of funds). In order to properly receive these events, you will need to set the event name in your configured integrations:There are several use cases for these events: in analytics tools, you may want to analyze how often billing issues occur for which cohorts or segments of users. In CRM tools, you may want to set up push notification or email campaigns to prompt subscribers with billing issues to update their means of payment.We hope this new event type is useful. Let us know about any concerns or issues with the new events!JensHead of Product @ RevenueCat

2347

3 years ago

JensRevenueCat Staff

posted in RevenueCat Announcements

Experiments going to private beta

As part of our launch of RevenueCat Projects, we have taken our experiments (price testing) feature to private beta. The feature has been in public beta for a while, and we have learned a lot from the beta and are planning to dramatically improve the feature before opening it up to everyone. Anyone who’s run experiments in the past is automatically part of the private beta. For customers on the Pro or Enterprise plan who wish to join the beta and run experiments, simply contact our support team.

1100

3 years ago

JensRevenueCat Staff

posted in RevenueCat Announcements

Amazon Appstore support for Android apps

Our launch of Amazon Appstore support is around the corner. If you are interested in joining the beta before official launch, let us know via this post or by dropping me an email: jens@revenuecat.com. JensHead of Product @ RevenueCat

2986

3 years ago

JensRevenueCat Staff

posted in RevenueCat Announcements

New conversion rate charts

Today, we are launching two new charts to better understand your funnel from newly acquired customer to paying subscriber.The Initial Conversion Rate chart shows what proportion of each cohort of new subscribers either started a trial or made a purchase without a trial. You can think of it as the proportion of subscribers who took an action on your paywall, or paywall conversion.The Conversion to Paying chart shows what proportion of each cohort of new subscribers ends up paying (either because they converted from a free trial to paying subscriber, or because they made a purchase without a trial). This can be thought of as the end-to-end view of the conversion funnel within your app.With these new charts, we now offer three views of conversion rates (the Trial Conversion chart remains, of course). Which of these are most useful and valuable to you will depend on your product setup—whether you offer subscriptions with trials, without trials, or a mix of both.Let us know if you have any

2357

3 years ago

tinaRevenueCat Staff

posted in RevenueCat Announcements

New Statsig integration

Today, we have launched a Statsig integration (available on the Pro plan), which automatically sends billing, subscriptions, and revenue metrics to your Statsig project. This integration will allow you to run A/B tests and experiments for your web and mobile apps, understand what features are causing product metrics to move, and compute how your new product improvements impact your business metrics. To set this up, follow RevenueCat documentation here: https://docs.revenuecat.com/docs/statsig

920

3 years ago

JensRevenueCat Staff

posted in RevenueCat Announcements

New subscription expiration event

As of today, RevenueCat is supporting a new event type that is surfaced via the customer view on the RevenueCat dashboard, webhooks, and integrations: The EXPIRATION event. This event is fired after the subscription of a customer expires (not necessarily at the exact second the subscription expires, but shortly thereafter). This should make it even easier for you to understand the subscription status of your customers, both by looking at the dashboard or in your own backend systems. The webhook documentation has more details about the event and its fields. A few points to note:For subscriptions that expired before we shipped this new event, we will backfill and show these events on the customer page in the dashboard as you visit the page for a given customer for the first time; however, we will not send these backfilled events to webhooks and integrations (so you don’t have to handle the case where you suddenly get expiration events from long churned customers). In order to send this n

13984

3 years ago

JensRevenueCat Staff

posted in RevenueCat Announcements

Changing our default chart experience

Starting today, we will default everyone who hasn’t changed their charts preference in the past to our new charts. The new charts already offer some features that the old ones don’t, like the refund rate chart or the ARR chart. There are a few features that are still missing from the new charts that we are working hard to bring to the new charts, like the churn chart and the ability to toggle between bar and line charts. However, since we are planning to remove the old charts once those gaps are closed, we want to make sure that as many people as possible try out the new charts and provide us with feedback before we make the switch.If you have any comments, please let us know below!

610

3 years ago

JensRevenueCat Staff

posted in RevenueCat Announcements

Refunds in new RevenueCat charts

Today, we are shipping changes to our new charts that provide improved transparency about refunded transactions. Especially given that on iOS, developers have no control and little transparency on refund decisions, it is important to keep an eye on refunds because they are an indicator of whether your customers are getting the value they expected when they started their subscription.The biggest improvement is our new refund rate chart. It shows you how many transactions happened in a given time period, and how many of them were refunded. Of course you can see how your refund rate develops over time, as well as filter or segment by various different dimensions, for example to understand refund rates of different products or between iOS App Store and Google Play Store.In addition to the new chart, we are also changing how refunds are handled in the remaining charts. Previously, when a refund occurred, we retroactively removed the affected subscription from all charts in which it was sho

2020

3 years ago

codyRevenueCat Staff

posted in RevenueCat Announcements

New RevenueCat SDK version improves user identification

New SDK ReleasesIn the new SDK version, we’ve redesigned the way that user identification works. We introduced two new methods, logIn and logOut, for handling user identification. These replace createAlias, identify and reset.To take advantage of the new Identity features, you just need to replace identify and createAlias with logIn, and reset with logOut. These new methods hopefully make usage more clear, and there’s some under-the-hood performance improvements you’ll get for free. New Dashboard OptionsRegardless of whether you have started using the new SDK, we’re also introducing a new option in the dashboard so you can configure the desired behavior when two different App User IDs restore the same Apple or Google receipt. Available options are: Transfer to the new user (default) Block the transferThis behavior can be changed at any time through the RevenueCat dashboard, and it replaces the deprecated SDK property allowAppStoreAccountSharing.(Note: Some developers may see the legacy

7581

3 years ago

codyRevenueCat Staff

posted in RevenueCat Announcements

RevenueCat Updates - July 2021

Identity v3In the new SDK version, we’ve redesigned how user identification works.These new APIs and configurations should make it significantly easier to integrate your accounts system with RevenueCat, as well as reduce the number of edge cases you need to consider.Learn about the new features New Developer CommunityBuilding apps can be tough, but we're here to help! We just launched this new RevenueCat community—a place to connect with other developers, get ideas about how to grow your app business, and ask questions about best practices for using RevenueCat. We’re really excited about the new community, and we hope you find it helpful!. Have an idea for how we can make RevenueCat even better? Let us know in this thread. New on the blogThe Case for Location-Independent Salaries Replicating a PostgreSQL Cluster to Redshift with AWS DMS Pain Points of Managing Cross-Platform Subscriptions What App Developers Need to Know About India’s New Subscription Rules New podcast episodesAlex Ros

840

3 years ago

JensRevenueCat Staff

posted in RevenueCat Announcements

Improved segmentation options in our new charts

Today, we are rolling out some additional segmentation options in the new RevenueCat charts (that were still missing in contrast to the old charts): Country, First purchase month, and Install month. If you haven’t checked out the new charts yet, give them a try – just head to the RevenueCat dashboard, click on “Charts” and then on “Try new charts”!

981

3 years ago

Page 2 / 2

Badge winners

beau-ec6daehas earned the badge One Year Wiser
ramsayhas earned the badge Strength In Numbers
ramsayhas earned the badge Why Not Both?
ramsayhas earned the badge Shipped It
mark-b82339has earned the badge One Year Wiser

Show all badges

Terms & Conditions Cookie settings

Sign up

Already have an account? Login

‏‏‎ ‎

Authenticate with RevenueCat

Log in to the Community

‏‏‎ ‎

Authenticate with RevenueCat

Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.

Enter your e-mail address

Back to overview

Scanning file for viruses.

Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.

This file cannot be downloaded

Sorry, our virus scanner detected that this file isn't safe to download.