Hey guys
I have a problem with my paywall, when testing on a physical device, the paywall does not fit entirely on the screen, but it’s not vertically scrollable only horizontally scrollable. The paywall was designed on Figma and imported to Revenuecat . If a paywall doesn’t fit entirely on the screen, it should be scrollable right ? I tested on an iphone 12 and on the paywall editor I used an iphone 17 screen. Look at the attached images. I’m also using Flutter
+6Hey
Thank you for reaching out!
To provide additional details, when Paywalls extend beyond the screen or don’t center on the screen, it usually indicates that the total width of some components exceeds the screen's width.
After checking your Paywall configuration, I can see that many components have fixed widths over 350 px. Please check the screenshots below for reference.
These are just examples; there were a few more components with fixed widths as well, mainly within the components shown in the screenshots.
To troubleshoot this, I would recommend checking all the components set on your Paywall and switching their width to `Fill`, so that your Paywall is flexible and adjusts to the device's screen size.
I hope this helps!
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
